FCC-ID: This is the CERTIFICATION certificate. FCC-ID certification applies to low-power transmitters such as cordless phones, automatic door remote controls, radio-controlled toys and security alarm systems, Part 15 devices that intentionally emit radio frequency energy, and Part 18 for mass consumer use in industrial and scientific research And medical equipment, automatic frequency conversion receivers and super-regenerative receivers, TV interface equipment, and home computers and their peripherals; products must be tested in an FCC-approved test room. After obtaining the test report, organize the technical data of the product, including: Product detail photos, block diagrams, user manuals, etc. are sent to the FCC TCB test room together with the test report. The FCC TCB test room confirms that all information is correct and issues a certificate authorizing an FCC ID number.

FCC ID certification type
FCC ID certification mainly includes several parts:
Test standard: FCC Part15 Subpart C 2019, Section 15.247

Finished Product Certification: Certification of complete wireless devices, including modules, motherboards, peripheral circuits, enclosures, etc.

Module certification: There are two types of module certification, one is restricted module certification, the other is non-restrictive module certification. Restrictive wireless module means that the type of installation host is limited, while non-restrictive module means that the installation host is not However, the module can work as a stand-alone system.

PC I certification/PC II certification: There are two types of certification: first-class change and second-class change. When there are different changes in certified products, how to deal with these changes during certification is basically carried out in accordance with these two types of changes.

Bluetooth device FCC-ID certification test project consultation 18102797454

1. Conducted Emission of harassment;

2. Radiation Spurious Emission;

3. Maximum output power Conducted Peak Output Power, limit value: less than or equal to 21dbm or 30dbm;

4. 20db bandwidth 20dB Occupied Bandwidth, limit value: none;

5. Carrier Frequencies Separation, limit: >25KHz or >two-thirds of the 20 dB bandwidth;

6. Hopping Channel Number, limit: ≥15 channels;

7. Dwell Time, limit value: <0.4s;

8. Sideband Band Edge;

9. Antenna Requirement.

Information to be prepared for FCC-ID certification application for Bluetooth devices

1. FCC-ID application form

2. FCC-ID test number

3. FCC authorization letter, FCC confidential letter

4. Block diagram, circuit diagram

5. Line description

6. Instructions for use, technical specifications and other information.

Consultation on the process of Bluetooth device FCC-ID certification in the United States 18102797454

1. The customer submits the application form, signs the contract and pays the payment;

2. The customer prepares testing samples (wireless products require a fixed frequency machine), and provides product information (see information requirements);

3. Issue a draft report, confirm the client, and issue a formal report;

4. If it is an FCC sDoC, the project is completed; if it is an application for an FCC ID, submit a report and technical information to TCB;

5. After the TCB audit is completed, the FCC ID certificate is issued, and the official report and the FCC ID certificate are sent;

6. After the enterprise obtains the FCC certification, the FCC logo and related Statement can be used on the product.