Analysis of Amazon live product selection suggestions
02/01/2023
Shenzhen Amazon operation recruitment has been greatly reduced by 80%! The 2023 job hunting "map" is here
02/01/2023baby playpen
If you list products on Amazon, you must comply with all federal, state, and local laws and Amazon policies (including this policy) that apply to those products and listings. Han Gong: 18835682048
Baby playpens to which this policy applies
A baby playpen is a framed playpen consisting of non-rigid rails and a base of mesh fabric or cloth. This policy applies to playpens (less than 35 inches [890 mm] in height from which infants cannot climb out) that are designed to provide a sleeping and play environment for children . This policy also applies to baby playpens with accessories. Examples of such combination products include changing table accessories, moving parts or other toys, and bassinet accessories. Playpens with accessories are subject to the additional requirements listed below.
This policy does not apply to inflatable playpens and non-full-size cribs. For more information on our policy on non-full-size cribs, see Non-full-size cribs .
Our Policy on Baby Playpens
Amazon requires that all playpens be tested and comply with the following specific regulations or standards:
commodity | Regulatory or Standard Requirements |
baby playpen | All of the following: · Consumer Product Safety Improvement Act (lead, phthalates); · Section 14(a)(5) of the CPSA (tracking labels); · 16 CFR Part 1130 (Requirements for Consumer Registration of Durable Infant and Toddler Goods); any of the following: ASTM F406-19 ( Standard Consumer Safety Specifications for Non-Full-Size Cribs and Playpens); · 16 CFR Part 1221 (Safety Standards for Playpens); · 16 CFR Part 1220 (Safety Standards for Nonfull-Size Cribs). |
Baby playpen with changing table accessories | All of the following: · Consumer Product Safety Improvement Act (lead, phthalates); · Section 14(a)(5) of the CPSA (tracking labels); · 16 CFR Part 1130 (Requirements for Consumer Registration of Durable Infant and Toddler Goods); any of the following: ASTM F406-19 ( Standard Consumer Safety Specifications for Non-Full-Size Cribs and Playpens); · 16 CFR Part 1221 (Safety Standards for Playpens); · 16 CFR Part 1220 (safety standards for non-full-size cribs); any of the following: · ASTM F2388-21 (Standard Consumer Safety Specification for Household Infant Diaper Changing Products); · 16 CFR Part 1235 (Requirements for Infant Diaper Changing Supplies). |
Infant playpen with moving parts or other toys | All of the following: · Consumer Product Safety Improvement Act (lead, phthalates); · Section 14(a)(5) of the CPSA (tracking labels); · 16 CFR Part 1130 (Requirements for Consumer Registration of Durable Infant and Toddler Goods); any of the following: ASTM F406-19 ( Standard Consumer Safety Specifications for Non-Full-Size Cribs and Playpens); · 16 CFR Part 1221 (Safety Standards for Playpens); · 16 CFR Part 1220 (safety standards for non-full-size cribs); any of the following: · ASTM F963-17 (toy safety standard consumer safety specification); · Title 16 of the Code of Federal Regulations , Part 1250 (ASTM F963 Mandatory Safety Standard for Toys ). |
Baby playpen with bassinet accessory | All of the following: · Consumer Product Safety Improvement Act (lead, phthalates); · Section 14(a)(5) of the CPSA (tracking labels); · 16 CFR Part 1130 (Requirements for Consumer Registration of Durable Infant and Toddler Goods); any of the following: ASTM F406-19 ( Standard Consumer Safety Specifications for Non-Full-Size Cribs and Playpens); · 16 CFR Part 1221 (Safety Standards for Playpens); · 16 CFR Part 1220 (safety standards for non-full-size cribs); any of the following: ASTM F406-19 Section 5.19 ( Standard Consumer Safety Specification for non-full-size cribs / playpens [ infant cradle / rocker accessories — installation components without accessories ] ); · ASTM F2906-13 (2019) standard (standard consumer safety specification for bedside cribs); · 16 CFR Part 1222 (Bedside Crib Safety Standards); · ASTM F2194-16e1 (Standard Consumer Safety Specifications for Infant Cradles and Bassinets); · 16 CFR Part 1218 (Safety Standards for Infant Bassinets and Bassinets). |
information requested
We may ask you to provide the following information at any time, so we recommend that you have it handy for submission:
· Your business name (if applicable) and seller number
· Your contact information: email address and phone number
A list of all the playpens you sell on Amazon
Product images and product packaging images (if applicable) for all playpens that you sell on Amazon.com .Images must include all sides of the product and product packaging
An image of the product or a test report proving that the product complies with the registration card requirements ( 16 CFR Part 1130)
An image of the product or a test report proving that the product complies with the mandatory tracking label requirement (Section 14(a)(5) of the U.S. Consumer Product Safety Act )
Product images or test reports demonstrating compliance with warning and hazard labeling requirements (if applicable)
· Product descriptions and manuals for all playpens you sell on Amazon
A Children's Product Certificate for all playpens (to which this policy applies) that you sell on Amazon.com
A test report issued by a laboratory accredited by the US Consumer Product Safety Commission, confirming that each product has been tested and complies with the above regulations and standards
Compliance Services
If you need help obtaining compliance certifications, testing and audits, use our network of service providers .
Submit Information
Complete the following steps to submit a compliance document or appeal for an individual product:
1. Go to the [Performance] tab and select [Account Status].
2. Under [Manage Your Compliance] in the lower right corner, click [Product Compliance Request].
1. To provide files, please click [Provide Files]; or
2. To appeal, please click [Appeal Request] and select the corresponding [Appeal Reason] from the drop-down menu.
3. To upload a file, drag and drop the file, or open a browse window to select the file.
4. Click [Submit] to send your submitted content for review by Amazon.
Please complete the following steps to submit compliance documents or appeals in bulk:
1. Go to the [Performance] tab and select [Account Status].
2. Under [Manage Your Compliance] in the lower right corner, click [Product Compliance Request].
3. Click [Upload compliance file].
4. Click [Generate Template] to download a template containing all your valid requests.
5. After filling out the template, click the [Upload Compliance Documents and Filled-in Template] tab.
1. Upload the file you listed for the relevant ASIN in the template , you can drag and drop the file, or open a browse window to select the file; and
2. Click [Choose File] to upload the completed template.
6. Click [Submit] to send your submitted content for review by Amazon.
policy violation
If you do not provide the requested information by the applicable deadline, we may take the following actions:
· Remove relevant product information
Suspension of your ability to add new products and /or listings
· Withhold all payments due to you
We reserve the right to take any necessary further steps at our sole discretion.
test process
1. Confirm the product
2. Fill in the application form
3. Provide samples
4. Schedule tests
5. Confirm the draft after passing the test
6. The draft document is confirmed to be correct and the official document is published
