Introduction to TELEC certification:

Consultation: 151- 3562- 9064 Same as V

The Radio Law requires type approval (ie, technical regulation compliance certification) for designated radio equipment. Certification is mandatory and the certification body is a registered certification body accredited by MIC in the scope of specified radio equipment. TELEC (Telecom Engineering Center) is the main registered certification body for radio equipment conformity certification in Japan.

TELEC (MIC) certification type:

TELEC certification includes test certification (Test Certification) and type certification (Type Certification) test certification is to verify each equipment unit, the certification is only valid for each verified equipment unit; type certification refers to the same design and manufacturing. The certification is valid for all samples of a batch of equipment, but if the design or manufacture of the equipment changes, the equipment will need to be recertified. It is worth noting that the use of non-low power radio stations and their terminal equipment requires a license from the MIC. In addition, there are two cases for the compliance certification of telecommunications terminal equipment: for ordinary telephone devices, only JATE certification is required in accordance with the requirements of the Telecommunications Business Law; for wireless terminal equipment, in addition to JATE certification according to the requirements of the Telecommunications Business Law, it is also required TELEC certification as required by the Radio Law.

Japan TELEC certification mark:

TELEC (MIC) certified products:

1.2.4G Products

2. Bluetooth products

3. wifi products

4. RFID products

Information to be submitted for TELEC certification:

1. Schematic diagram of the whole machine

2. Block diagram of the whole machine

3. Instruction Manual

4. Operating Instructions

5.BOM

6. Module schematic

7. Module block diagram

8. Module specification

9. Factory ISO9001 certificate

10.label and location map

11. Antenna Specifications: Including the name of the antenna, the form of the antenna, the maximum gain of the antenna, the antenna measurement diagram, the antenna appearance and the size diagram.

illustrate:

1. (All submitted documents are recommended to be Japanese documents, and English documents are also acceptable). The test report can be in the language of the local testing agency.

2.TELEC is a mandatory certification for wireless products in Japan, which is somewhat similar to the domestic SRRC. It follows the Japanese Radio Law. The specific test specification is to follow the MIC (Ministry of Internal Affairs and Communications) Notice No.88 regulations.

3. The test items of WiFi and Bluetooth products are basically similar to the European standard EN300 328. Among them, the standard used by 2.4GHz WiFi products (/g, 2412~2472 MHz) and Bluetooth products is MIC Notice No.88 Annex43, but for 14 channels (Channel14: 2471 ~ 2497MHz) of 2.4GHz WiFi products, you need to use Annex44 separately. Testing and issuing reports.

4. For 5GHz WiFi products (802.11a, 5180~5320MHz, W52 Band and W53 Band), the test standard to follow is Annex45, but it should be noted that the data shows that MIC will modify Annex45 in the near future, and 5.6GHz devices (Band W56 ) is also classified into Annex45, and has more stringent DFS test requirements for Band 56 frequency band.

2. Information to be submitted for TELEC certification of 4G products:

1. Schematic diagram of the whole machine

2. Block diagram of the whole machine

3. User Manual

4. Operating Instructions

5. BOM

6. Module schematic

7. Module block diagram

8. Module Specifications

9. Factory ISO9001 certificate

10.label and location map

11. Antenna specification: including the name of the antenna, the form of the antenna, the maximum gain of the antenna, the measurement diagram of the antenna, the appearance of the antenna and the size diagram.

Note: All documents provided above must be in English/Japanese

Bluetooth product TELEC certification test items:

1. Frequency error test

2. Coupling Bandwidth/Carrier Bandwidth Test

4. Antenna power error test

5. Receiver spurious disturbance test

6. EIRP antenna power test

7.3dB lobe bandwidth test

8. Duty cycle test

9. Take the time test